Get €25 off for the SCQ25. Code: WINTER25. Get €50 off for the SCQ25T, SCQ50 and Pico Blue set. Code: WINTER50
shunts 300 A 500 A
EXTENSION MODULES

Combo shunts SC303 and SC503

WHAT'S IN THE BOX?

Shunt SC303 or SC503

5 m data cable
1 m temperature sensor
3 m fuse protected voltmeter cable

Shunt Cover

Warranty

The SC303 and SC503 are innovative combination of high-amp shunt and tank level module. Their primary purpose is to provide complete battery monitoring by showing you the complete state of a battery or battery bank’s charge, its current reading and voltage reading, as well as the temperature of the battery compartment.

With additional inputs that are provided on the module itself, it can also serve the purpose of monitoring additional voltage or resistance sensors, such as tank-level sensors. The high-amp shunt can also be used for measuring: 

– the current draw of heavy consumers (inverters, bow and stern thrusters, anchor winches)
– the current of generators (shore power chargers and solar panels) 

The main difference between them is the continuous current limit they allow, namely 300 amps for the SC303 and 500 amps for the SC503. 

They have:
– 2 Voltage inputs up to 75.0 V.
– 2 Resistance inputs (for the temperature on the SC503, for tank level or temperature on the SC303).
– 1 Socket for a temperature sensor with a JST connector.
– 1 Current sensor up to 300 A or 500 A.

HOW TO CONNECT

WIRING OPTIONS

wiring shunts

You can wire the shunts to either the LOW (-) or HIGH side (+), unless the voltage of the system exceeds 35V. In this case, the shunt must be wired to the LOW(-) side.

You can also mix the shunts wiring, by connecting some to the positive and some to the negative side.

Convenient for wiring on retrofitting for existing boats and campervans.

Multiple shunts can be daisy-chained together or linked to our other expansion modules.

Play Video

Techtalk

Operating
Voltage range6 - 35 VDC
Temperature range​From -20°C up to 70°C (-4°F up to 158°F)
Power consumption at 12 V
Operating​1.2 mA
Current measuring range0.01 - 300 A
Accuracy ± 1%
Resolution 0.01 A
Sampling rate 100 ms
Maximal current
Continuous 300 A
Peak current (<5min) 400 A
Peak current (<1min) 700 A
Voltage drop at 300A 37,5 mV
Maximal voltage on terminals35 V
Voltage inputs (U1, U2)2
Range 0 - 75 VDC
Accuracy ± 0.3 %
Resolution 1 mV
Sampling rate 100 ms
Resistance inputs (R1, R2, JST socket) 3
Range 0 Ohm–65 kOhm
Accuracy ±3 %
Temperature sensor – NTC 10k
Range From –13°C to +80°C
Accuracy (from –10 to +60°C, from 14 to 140°F) ± 3,0%
CommunicationSiCOM
Installation and dimensions
Dimensions 125 x 70 x 22 mm
4.92 x 2.75 x 0.86 in
Battery connectionM10 bolts
Operating
Voltage range6 - 35 VDC
Temperature range​From -20°C up to 70°C (-4°F up to 158°F)
Power consumption at 12 V
Operating​1.2 mA
Current measuring range0.01 - 500 A
Accuracy ± 1%
Resolution 0.01 A
Sampling rate 100 ms
Maximal current
Continuous 500 A
Peak current (<5min) 700 A
Peak current (<1min) 1000 A
Voltage drop at 300A 41,6 mV
Maximal voltage on terminals35 V
Voltage inputs (U1, U2)
Range 0 - 75 VDC
Accuracy ± 0.3 %
Resolution 1 mV
Sampling rate 100 ms
Resistance inputs (R1, R2, JST socket) 3
Range 0 Ohm–65 kOhm
Accuracy ±3 %
Temperature sensor – NTC 10k
Range From –13°C to +80°C
Accuracy (from –10 to +60°C, from 14 to 140°F) ± 3,0%
CommunicationSiCOM
Installation and dimensions
Dimensions 125 x 70 x 22 mm
4.92 x 2.75 x 0.86 in
Battery connectionM10 bolts

Need any help or advice before deciding to go with this shunt? Or after purchasing it? Send your question to [email protected]

Updating…
  • No products in the cart.