Simarine SN01 SiCOM NMEA 2000 gateway module allows your PICO to transmit and receive information from certain
devices connected to an existing NMEA 2000 network. It allows control of switch banks, transmitting battery status, tank levels
and some environmental information. Using the gateway, PICO can also display a range of engine and transmission parameters
if they are connected to the NMEA network.

Technical information
Operating | |
---|---|
Power source voltage range | 6 - 35 V |
Temparature range | -20 – +70 °C |
Power consumption at 12 V | |
Operating | 0.8 mA |
Dimensions | 183x91x34 mm |
---|---|
Connectivity | Up to |
NMEA 2000 backbone | 1 |
SICOM port | 2 |
List of supported NMEA 2000 PGN
Below is a list of supported NMEA 2000 PGN’s. PICO allows transmitting or receiving of certain PGN’s according to the table below.
PGN | PGN Name | receiving | transmitting |
---|---|---|---|
59904 | ISO Request | Yes | No |
60928 | ISO Address Claim | Yes | Yes |
126996 | Product Information | No | Yes |
127257 | Attitude | No | Yes |
127502 | Switch Bank Control | No | Yes |
127505 | Fluid Level | No | Yes |
127506 | DC Detailed Status | No | Yes |
127508 | Battery Status | No | Yes |
130310 | Environmental Parameters | No | Yes |
130314 | Actual Pressure | No | Yes |
Technical information
Operating | |
Voltage range | 6 – 35 V |
Temperature range | -20 – +70 °C |
Power consumption at 12V | |
Operating | 3,5 mA |
Current measuring channels | 4 |
Current measuring range | |
Per channel | 0,01 – 50 A |
Accuracy | ± 0,6 % |
Resolution | 0,01 A |
Sampling rate | 100 ms |
Maximal current | |
Continuous | 25 A |
Peak current (<1 min) | 35 A |
Peak current (<5 sec) | 50 A |
Voltage drop at 25 A | 35 mV |
Maximal voltage on connections | 35 V |
Voltage inputs | |
Range | 0 – 35 V |
Resolution | 1 mV |
Accuracy | ± 0,2 % |
Sampling rate | 100 ms |
Resistance inputs | |
Range | 0 ohm – 65 kohm |
Accuracy | ± 3,0% |
Number of connections | |
Tank level sensors | 7 |
Temperature sensors | 4 |
Additional information
Weight | 0.3 kg |
---|---|
Dimensions | 10 × 5 × 3 cm |
30 DAY MONEY
BACK GUARANTEE
FREE SHIPPING
EASY TO USE &
INSTALL
Monitoring
possibilities
up to
0
Batteries
up to
0
Tanks
up to
0
Temperature
Related products

Active combo shunt for PICO battery monitor with 2 voltage inputs up to 75.0 V, 2x tank level or temperature, 1x socket for temperature sensor with JST connector and 1x current sensor up to 300A.

Active combo shunt for PICO battery monitor with 2 voltage inputs up to 75.0 V, 2x temperature, 1x socket for temperature sensor with JST connector and 1x current sensor up to 500A.

ST107 ist das neueste Digitalmodul mit umfangreichen Anschluss- (und Überwachungs-) Möglichkeiten. Es ermöglicht die Überwachung von bis zu 7 Tankfüllständen, 3 Batteriespannungen und 4 Temperaturen.

SCQ25 ist ein innovatives Nebenwiderstandsmodul zur Überwachung von Einzelverbrauchern und Generatoren mit 4 Stromsensoren für jeweils bis zu 25 A. Für Systeme mit 12 V und 24 V.