Simarine SN01 SiCOM NMEA 2000 Gateway module allows your PICO to transmit data of the devices connected to the PICO system. It allows control of switch banks, transmitting battery status, tank levels and some environmental information. Using the gateway, PICO can also display a range of engine and transmission parameters if they are connected to the NMEA network.

List of supported NMEA 2000 PGN
Below is a list of supported NMEA 2000 PGN’s. PICO allows transmitting or receiving of certain PGN’s according to the table below.
PGN | PGN Name | receiving | transmitting | |
---|---|---|---|---|
59904 | ISO Request | Yes | No | |
60928 | ISO Address Claim | Yes | Yes | |
126996 | Product Information | No | Yes | |
127257 | Attitude | No | Yes | |
127502 | Switch Bank Control | No | Yes | |
127505 | Fluid Level | No | Yes | |
127506 | DC Detailed Status | No | Yes | |
127508 | Battery Status | No | Yes | |
130310 | Environmental Parameters | No | Yes | |
130314 | Actual Pressure | No | Yes |
Technical information
Operating | |
Voltage range | 6 – 35 V |
Temperature range | -20 – +70 °C |
Power consumption at 12V | |
Operating | 3,5 mA |
Current measuring channels | 4 |
Current measuring range | |
Per channel | 0,01 – 50 A |
Accuracy | ± 0,6 % |
Resolution | 0,01 A |
Sampling rate | 100 ms |
Maximal current | |
Continuous | 25 A |
Peak current (<1 min) | 35 A |
Peak current (<5 sec) | 50 A |
Voltage drop at 25 A | 35 mV |
Maximal voltage on connections | 35 V |
Voltage inputs | |
Range | 0 – 35 V |
Resolution | 1 mV |
Accuracy | ± 0,2 % |
Sampling rate | 100 ms |
Resistance inputs | |
Range | 0 ohm – 65 kohm |
Accuracy | ± 3,0% |
Number of connections | |
Tank level sensors | 7 |
Temperature sensors | 4 |
Additional information
Weight | 0.3 kg |
---|---|
Dimensions | 10 × 5 × 3 cm |
30 DAY MONEY
BACK GUARANTEE
FREE SHIPPING
EASY TO USE &
INSTALL
Related products

Active combo shunt for PICO battery monitor with 2 voltage inputs up to 75.0 V, 2x tank level or temperature, 1x socket for temperature sensor with JST connector and 1x current sensor up to 300A.

Active combo shunt for PICO battery monitor with 2 voltage inputs up to 75.0 V, 2x temperature, 1x socket for temperature sensor with JST connector and 1x current sensor up to 500A.

ST107 is an the ultimate digital module, that allows wide connection (and monitoring) possibilities. It enables monitoring up to 7 tank levels, 3 battery voltages and 4 temperatures.

SCQ25 is an innovative shunt module for monitoring individual consumers and generator with 4x current sensors up to 25A each. For 12V and 24V systems.