Innovative combination of shunt and tank level module. SC303 is an active combo shunt for PICO battery monitor with 2x voltages, 2x tank level or temperature, 1x socket for temperature sensor with JST connector and 1x current sensor up to 300A for up to 75V systems.
It can be used for monitoring current draw of heavy consumers (inverters, bow and stern thrusters, anchor winches) and current generators (shore power chargers and solar panels). Additionally, it allows monitoring tanks for fuel, fresh and grey water.
Technical information
| Operating | |
|---|---|
| Power source voltage range | 6 – 35 V |
| Temparature range | -20 – +70 °C |
| Power consumption at 12 V | |
| Operating | 0.8 mA |
| Current measuring range | |
| Per channel | 0,1 – 320 A |
| Accuracy | ± 0,6 % |
| Resolution | 0,01 A |
| Sampling rate | 100 ms |
| Maximal current | |
| Continuous | 300 A |
| Peak current (<1 min) | 700 A |
| Peak current (<5 min) | 400 A |
| Voltage drop at 300 A | 50 mV |
| Maximal voltage on connections | 35 V |
| Voltage inputs | |
|---|---|
| Range | 0 – 75 V |
| Resolution | 1 mV |
| Accuracy | ± 0,2 % |
| Sampling rate | 100 ms |
| Resistance inputs | |
| Range | 0 Ohm – 65 kOhm |
| Accuracy | ± 3,0% |
| Temparature sensor – NTC 10k | |
| Range | -15 – +80 °C |
| Accuracy (-10 – 60 °C, 14 – 140 °F) | ± 3,0% |
| Connectivity | Up to |
| Batteries | 1 |
| Temparature sensors | 3 |
| Voltage sensors | 2 |
| SiCOM RJ9 Sockets | 2 |
| Installation and Dimension | |
| Dimensions (length x width x depth) | 120 x 120 x 60 mm |
| Battery Connection | M 10 bolts |
Technical information
Additional information
30 DAY MONEY
BACK GUARANTEE
FREE SHIPPING
EASY TO USE &
INSTALL
Monitoring
possibilities
up to
0
Batteries
up to
0
Tanks
up to
0
Temperature
Connection
possibilities
- 1X CURRENT INPUT UP TO 300A
- 2X VOLTAGE INPUTS
- 1X TEMPARATURE INPUT
Related products
Active combo shunt for PICO battery monitor with 2 voltage inputs up to 75.0 V, 2x tank level or temperature, 1x socket for temperature sensor with JST connector and 1x current sensor up to 300A.
Active combo shunt for PICO battery monitor with 2 voltage inputs up to 75.0 V, 2x temperature, 1x socket for temperature sensor with JST connector and 1x current sensor up to 500A.
ST107 is an the ultimate digital module, that allows wide connection (and monitoring) possibilities. It enables monitoring up to 7 tank levels, 3 battery voltages and 4 temperatures.
SCQ25 is an innovative shunt module for monitoring individual consumers and generator with 4x current sensors up to 25A each. For 12V and 24V systems.
SCQ25T its an innovative combination of shunt, tank interface and voltage module with wide range of monitoring possiblities.
in Slovenia, EU.
