COMBO QUADRO SHUNT MODULE
Looking for a highly versatile digital shunt module for
monitoring smaller consumers like refrigerator and/or
generators like solar, wind, hydro or shore power?
SCQ25T its an innovative combination of shunt, tank interface and voltage module with wide range of monitoring possiblities.
SCQ25T its an innovative combination of shunt, tank interface and voltage module with wide range of monitoring possiblities.
Technical information
| Operating | |
|---|---|
| Voltage range | 6 – 35 V |
| Temparature range | -20 – +70 °C |
| Power consumption at 12 V | |
| Operating | 2.5 mA |
| Current measuring channels | 4 |
| Current measuring range | |
| Per channel | 0,01 – 25 A |
| Accuracy | ± 0,6 % |
| Resolution | 0,01 A |
| Sampling rate | 100 ms |
| Maximal current | |
| Continuous | 25 A |
| Peak current (<1 min) | 35 A |
| Peak current (<5 min) | 50 A |
| Voltage drop at 300 A | 35 mV |
| Maximal voltage on connections | 35 V |
| Voltage inputs | |
|---|---|
| Range | 0 – 75 V |
| Resolution | 1 mV |
| Accuracy | ± 0,2 % |
| Sampling rate | 100 ms |
| Resistance inputs | 4 |
| Range | 0 Ohm – 65 kOhm |
| Accuracy | ± 3,0% |
| Relay (monostable) | 1 |
| Maximum operating current | 1 A |
| Maximum Common Input Voltage (COM) | 6 – 30 V |
| Connectivity | Up to |
| Current sensors | 4 |
| Voltage sensors (voltage drop/tank level) | 3 |
| Resistive inputs (tank level/temperature) | 4 |
| Relay Common Input | 1 |
| Relay Output Normaly Open (NO) | 1 |
| Relay Output Normaly Closed (NC) | 1 |
| SiCOM RJ9 Sockets | 2 |
| Installation and Dimension | |
| Dimensions (length x width x depth) | 182 x 80 x 32 mm |
| Weight | 230 g |
30 DAY MONEY
BACK GUARANTEE
FREE SHIPPING
EASY TO USE &
INSTALL
Monitoring
possibilities
up to
0
Batteries
up to
0
Tanks
up to
0
Temperature
Connection
possibilities
- UP TO 4X CONSUMER DEVICES
- UP TO 4X GENERATORS
- 3X VOLTAGE INPUTS
- 4X RESISTANCE INPUTS
- 1X RELAY INPUT
Related products
Active combo shunt for PICO battery monitor with 2 voltage inputs up to 75.0 V, 2x tank level or temperature, 1x socket for temperature sensor with JST connector and 1x current sensor up to 300A.
Active combo shunt for PICO battery monitor with 2 voltage inputs up to 75.0 V, 2x temperature, 1x socket for temperature sensor with JST connector and 1x current sensor up to 500A.
ST107 is an the ultimate digital module, that allows wide connection (and monitoring) possibilities. It enables monitoring up to 7 tank levels, 3 battery voltages and 4 temperatures.
SCQ25 is an innovative shunt module for monitoring individual consumers and generator with 4x current sensors up to 25A each. For 12V and 24V systems.
in Slovenia, EU.
